 |
No more gears... No more tears...
Hoss X4E Frame
Kit For Trex 450 and clones
HOSS X4E KIT
PRODUCTION IS ON HOLD, EMAIL ME IF YOU HAVE
QUESTIONS.
Base kits now include INA one way bearing pre
pressed and aluminum bearing/servo mounts.
Base Kits: AR2007 G10 Frame kit,
w/ Hoss Landing Gear:
$189.99
AR2008 G10 Frame kit, w/ Stock LG mod Kit:
$194.99
AR2009 CF Frame kit, w/ black G10 Hoss Landing
Gear: $239.99
AR2010 CF Frame kit, w/ Stock LG mod Kit:
$244.99
AR2011 CF Frame kit, w/ CF Hoss Landing Gear:
$254.99
81
Page Informational forum
thread
02-07-2008: Black G10,
Blue G10, and Blue Carbon Fiber are available for
ordering.
The most advanced, universal and
durable T-rex frame kit out there.
"The main belt drive allows for a quieter operation,
and you don’t have to worry about stripping the main gear. Pretty much 98%
of the time with the stock Trex etc, you strip the
main gear in a crash. Each gear costs $3. Personally I’ve
crashed mine many times and still am using the
same belt. Also the Main pulley is Aluminum 6061
and doesn’t break in the crashes."
The
Frame has
real 120 degree ccpm servo placement. I call it
“True 120 CCPM”. Only a few other frames have this
for this size of helicopter. With the True 120
ccpm the servos are actually mounted in a 120 degree
fashion. The good thing about
mine is I make the servo mounts specifically for
certain models of servos. So the linkages are lined
up exactly with the swash plate. Also its 1 linkage
from the servo to the swash plate. This system
provides the best control you can get.
Main Features:
-
True 120 degree eCCPM
-
Main belt driven
-
Tail belt driven
-
Bottom motor mount
-
Large protective battery tray
-
Level or raked landing gear
-
HS-56 or HS-65 servo compatible
-
Accepts stock canopy
-
Auto-rotation implemented
-
Aluminum
motor plate and braces
-
Urethane / Kevlar belts
-
CNC Aluminum pulleys
-
3rd lower bearing
|
Specifications:
-
Main pulley: 120T
-
Sub pulley: 48T
-
Motor pulleys: 10T to 22T (one per kit)
-
Tail drive ratio 4.36:1
-
Main belt: 135T
-
Tail belt: 454T
-
1.6 mm thick G10 or CF
-
CNC cut pieces
-
Grade 6 to 12 Hardware
-
Up to 36mm Diameter motors
|
|
Required parts and components to complete
kit:
- Entire Rotor assembly including main
shaft with one way assembly
- Main bearings optional order
- Entire Tail assembly including boom
- Compatible swash plates: (Micro
heli) MH-TX4120XL, (Align) HS1090, HS1111-78,
HS1111,
(Heli-up) CLP00137
- Brushless motor: 400 to 500 size
(in-runners are quieter)
- Micro Receiver: 5 or 6 channel
- HS56 or HS65 servos (3)
- Electronic Speed Controller (30 to
50amp)
- Battery Eliminator Circuit (unless
ESC integrated)
- 6 channel CCPM capable transmitter
- 3,4 or 5 Cell, 1700-2600mAH Lithium
Polymer battery
For brushless motor maximum
efficiency:
If using 3 cell Lithium Polymer: 1500
to 3500KV motor
If using 4 cell Lithium Polymer: 1500 to
2500KV motor
If using 5 cell Lithium Polymer: 1500 to
2000KV motor
Brushless motors: 3mm or 3.175mm
shaft, (for 10T to 14T pulley)
Brushless motors: 4mm shaft, (for 15T to
22T pulley)
Suggested
motors/pulleys: (please
email us your combinations for listings)
JGF 450TH - 11,12T/3cells, 10T 4cells
JGF 450F - 10T/3cells
JGF 500TH - 10T/3cells
JGF 500T - 14T/4cells
Align 430L, XL ,X - 10T/3cells ( 3550,3700 KV )
NEU 1107/2Y,2.5Y - 10T/3cells
Medusa MR-028-040-3400 - 10T/3cells
Medusa MR-028-040-2500 - 14T/3cells, 10,11T/4cells
Medusa MR-028-032-3400 - 10T/3cells
Medusa MR-028-032-2800 - 12T/3cells, 10T/4cells
Medusa MR-028-032-2500 - 14T/3cells, 10,11T/4cells
Hacker A20-6XL - 14T/3cells, 10,11T/4cells
|
All fasteners and hardware
are included
|
The parts are CNC machined, a mix of aluminum,
G10, and delrin or CF. All the hardware and fasteners are high
quality, from grade 6 to 12.
Made in the
USA! Here in
Texas!
|
|
Kit Options:
1. G10 color (black or blue) Optional CF
2. HS-65 or HS-56 servo mounts (DS285 on special
request)
3. 1 motor pulley included - sizes: 10T, 11T, 12T, 14T
3.17mm bore
I can get 3mm bore or 4mm bore pulleys
on special request.
|
|
A little history: The Hoss X4E is
based of the previous X4 design. I looked at every
area and refined or improved it.
|
Hoss X4E
Upgrade Kit
AR2002 G10 Frame Kit w/ Hoss Landing Gear:
$74.99
AR2014 G10 Frame Kit w/ Stock LG mod Kit:
$79.99
AR2015 CF Frame kit, w/ G10 Hoss Landing Gear:
$119.99
AR2016 CF Frame kit, w/ Stock LG mod Kit:
$124.99
AR2017 CF Frame kit, w/ CF Hoss Landing Gear:
$129.99
Convert your Hoss X4 to
a X4E
Hoss x4 Frame
kits purchased before 2-10-2007 require:
Tail guide
bearing kit (with 6mm bearings)- AR2630
One of these V2 servo tower upgrade kits - AR1056B, AR1065B,
AR2056, AR2065
X4 and
X4E Delrin servo / bearing mount Kit ( V2 ) -
$14.99
AR1056B or
AR1065B
These mounts
are CNC machined. They are delrin with aluminum supports.
X4 and
X4E Aluminum servo / bearing mount Kit ( V2 ) -
$34.99
AR2056 or
AR2065
These mounts
are CNC machined then hand finished. They are lightly polished
6061-T6 aluminum
X4E Stock Landing Gear Mod Kit - $11.99
AR2058
This kit
converts your Hoss X4E to use other landing gear. CNC
machined delrin is super strong.
X4E Main
belt guide tower upgrade - $14.99
AR2072
Main belt guide
tower upgrade recommended aggressive 3D and climb-outs; comes with 140T belt or
143T belt.
Use 140T belt for 10,11,12T pulleys. Use 143T belt for 14T
pulley.
Copyright © 2006-2008 Accelerated RC
|
 |
